Understanding Ferrous Ammonium Sulfate Safety Data Sheet

Understanding Ferrous Ammonium Sulfate Safety Data Sheet

Welcome to the comprehensive guide on ferrous ammonium sulfate safety data sheet. As we explore the properties, hazards, and regulatory information associated with this compound, it is crucial to understand the precautions necessary for safe handling. From personal protective equipment to first aid measures, this article aims to equip you with the knowledge to navigate the potential risks effectively and responsibly.

Safety Data Sheet for Ferrous Ammonium Sulfate

Here’s the safety data sheet for Ferrous Ammonium Sulfate:

  • Product Name: Ferrous Ammonium Sulfate
  • CAS Number: 7783-85-9
  • Manufacturer/Supplier: AquaPhoenix Scientific, Inc
  • Emergency Telephone Number: Fisher Science Education Emergency Telephone No.: 800-535-5053

Hazards Identification:

  • Irritant: Causes skin irritation.
  • Eye Irritation: Causes serious eye irritation.
  • Respiratory Irritation: May cause respiratory irritation.

Precautionary Measures:

  1. Read label before use.
  2. Avoid breathing dust/fume/gas/mist/vapors/spray.
  3. Wash skin thoroughly after handling.
  4. Use only outdoors or in a well-ventilated area.
  5. Wear protective gloves, clothing, eye protection, and face protection.
  6. Do not eat, drink, or smoke when using this product.

First Aid Measures:

  • Inhalation: Move exposed individual to fresh air. Seek medical advice if discomfort persists.
  • Skin Contact: Wash affected area with soap and water.
  • Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
  • Storage: Store locked up in a well-ventilated place. Keep the container tightly closed.
  • Disposal: Dispose of contents and container at an approved waste disposal plant.

Remember, this information is for safety purposes, and if you have any specific concerns, consult the official safety data sheet provided by the manufacturer

Exploring Ferrous Ammonium Sulfate Properties and Hazards

Ferrous Ammonium Sulfate (chemical formula: Fe(NH₄)₂(SO₄)₂·6H₂O) is a light green crystalline solid with several applications in medicine, chemical analysis, and metallurgy. Let’s delve into its properties and hazards:

  1. Physical Properties:

    • Melting Point: Not specified.
    • Water Solubility: Soluble in water, forming weakly acidic solutions.
    • Specific Gravity: Denser than water (1.86 at 68°F), so it will sink.
    • Flash Point: Data unavailable.
    • Autoignition Temperature: Data unavailable.
  2. Hazards:

    • Environmental Hazard: The primary concern is its threat to the environment. Immediate steps should be taken to limit its spread.
    • Health Hazards:
      • Inhalation: Dust irritates the nose and throat.
      • Ingestion: Causes irritation of the mouth and stomach. If ingested in large amounts, induce vomiting and provide plenty of water.
      • Eye and Skin Contact: Dust irritates the eyes and can also irritate the skin upon prolonged contact.
    • Fire Hazard: In fires, irritating and toxic ammonia and oxides of nitrogen may form.
    • Reactivity: Releases irritating and toxic ammonia and oxides of nitrogen if burned.
    • Protective Measures:
      • Wear a dust mask, goggles or a face shield, and protective gloves.
      • In case of eye or skin contact, flush with water.
      • For ingestion, give a large amount of water and induce vomiting if necessary.
  3. Regulatory Information:

    • EPA Consolidated List of Lists:
      • Regulatory Name: Ferrous ammonium sulfate
      • CAS Number: 10045-89-3
      • EPCRA 302 EHS TPQ: 1000 pounds
      • CAA 112 ® RMP TQ: Data unavailable

Remember that safety precautions are crucial when handling ferrous ammonium sulfate due to its potential hazards . Always follow proper safety protocols and guidelines.

A diagram of the molecular structure of copper(II) sulfate tetrammine, which has a central copper(II) ion surrounded by four ammonia ligands and four water ligands.

IMG Source: chemspider.com

Precautions for Handling Ferrous Ammonium Sulfate

When handling ferrous ammonium sulfate, follow these precautions:

  1. Personal Protective Equipment (PPE):

    • Wear appropriate PPE, including gloves, safety glasses or goggles, protective clothing, and face protection.
  2. Ventilation:

    • Ensure adequate ventilation in the process area to prevent vapor formation.
  3. Avoid Contact:

    • Avoid getting it in your eyes, on your skin, or on clothing.
    • Do not ingest or inhale it.
  4. Dust Formation:

    • Take precautions to prevent dust formation.
  5. Storage:

    • Store it in a cool, dry, well-ventilated area away from incompatible materials.
    • Keep containers tightly closed and protect them from physical damage.
    • Protect from direct light and minimize air contact.
  6. Hygiene:

    • Wash thoroughly after handling.
    • Keep it away from food, beverages, and feed sources.
    • Immediately remove soiled and contaminated clothing.
  7. Inhalation:

    • Do not inhale gases, fumes, dust, mist, vapor, or aerosols.

A Material Safety Data Sheet (MSDS) for ammonium ferrous sulfate hexahydrate.

IMG Source: gstatic.com

First Aid Measures for Ferrous Ammonium Sulfate Exposure

Ferrous Ammonium Sulfate, also known as ammonium iron(II) sulfate, is a chemical compound that can cause skin and eye irritation. If you or someone else is exposed to it, follow these first aid measures:

  1. Inhalation:

    • Move the exposed individual to fresh air.
    • Loosen any tight clothing.
    • Position the person comfortably.
    • Seek medical advice if discomfort or irritation persists.
    • If breathing is difficult, provide oxygen.
  2. Skin Contact:

    • Wash the affected area with soap and water.
    • Rinse the exposed skin gently using water for 15-20 minutes.
  3. Eye Contact:

    • Flush the eyes with plenty of water.
    • If irritation persists, seek medical attention.

Remember to consult a medical professional if symptoms persist or if you have any concerns. Safety precautions include wearing protective gear, avoiding inhalation of dust or fumes, and keeping the substance away from children. For specific treatment instructions, refer to the supplemental first aid instructions on the product label

A label showing the chemical name, formula, and some basic safety information for Ferrous Ammonium Sulfate.

IMG Source: scribdassets.com

Ferrous Ammonium Sulfate and Environmental Impact

Ferrous ammonium sulfate, also known as ferrous sulfate, is a compound with various applications, including water treatment and environmental remediation. Let’s explore its impact on the environment and proper disposal methods:

  1. Environmental Impact:

    • Sources: Ferrous waste by-products primarily originate from the metallurgical industry. These waste materials have high potential for valorization in the context of the circular economy.
    • Types of Ferrous Compounds: Different industries generate various ferrous compounds, such as mill scale, ferrous sulfate, and magnetite.
    • Conversion Methods: Researchers have explored methods to convert these ferrous wastes into value-added products for water and wastewater decontamination.
    • Harmful Effects: While ferrous waste can be beneficial when used appropriately, it can also have adverse effects on the environment and human health.
    • Future Perspectives: Continued research aims to find sustainable ways to utilize and manage these types of waste.
  2. Disposal Methods:

    • Avoid Release: Ferrous ammonium sulfate should not be released directly into the environment.
    • Groundwater Contamination: Prevent material contamination of groundwater systems.
    • Surface Water and Sewer Systems: Do not flush it into surface water or sanitary sewer systems.
    • Spillage Cleanup: In case of spillage, sweep up or vacuum the material and collect it in a suitable container for proper disposal.
    • Dust Formation: Avoid dust formation during handling.

A flowchart of the process for the synthesis of zeolite A from kaolin.

IMG Source: mdpi-res.com

In conclusion, the safety data sheet for ferrous ammonium sulfate serves as a vital resource for ensuring safe handling practices. By following the outlined precautions, such as proper storage, personal protective equipment use, and emergency response procedures, individuals can mitigate the associated risks effectively. Remember, prioritizing safety and adhering to best practices are essential when working with hazardous substances like ferrous ammonium sulfate.

Stay informed, stay safe, and always refer to the official safety guidelines provided by the manufacturer for specific instructions and details.


    Leave a Reply

    Your email address will not be published. Required fields are marked *